Perl Module Dependencies

Perl Modules which are only required by other modules

The modules on the previous page are referenced from other pages in BLFS, but these modules are only in the book as dependencies of those modules. If you use the CPAN install method, you do not need to read this page.

The BLFS editors pay much less attention to these modules, and the versions will not be regularly reviewed. In all cases, only the required or recommended dependencies are listed - there might be other modules which allow more tests to be run, but omitting them will still allow the tests to PASS.

[Note]

Note

The links on this page (to metacpan.org) should go to "known good" versions, for which their dependencies are correct. If you wish to use a later version, please check the Changes file at https://metacpan.org - sometimes added dependencies are listed, other times not. Some of these modules have very frequent updates, often bringing different dependencies. The linked metacpan.org versions below were known to work with the module versions in BLFS when last reviewed.

However, if you notice that the Changes file for a newer version than is in the current development book reports a fix for a security issue, please report this to either the blfs-dev or the blfs-support list.

Similarly, if you discover that an updated module on the previous page needs an extra dependency, please report this.

Algorithm::Diff-1.201

Introduction to Algorithm::Diff

Algorithm::Diff computes 'intelligent' differences between two files or lists.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Algorithm::Diff

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Alien::Build-2.83

Introduction to Alien::Build

Alien::Build provides tools for building external (non-CPAN) dependencies for CPAN.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Alien::Build Dependencies

Required

Capture-Tiny-0.48, File-Which-1.27, FFI-CheckLib-0.31 and File-chdir-0.1011

Installation of Alien::Build

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Alien::Build::Plugin::Download::GitLab-0.01

Introduction to Alien::Build::Plugin::Download::GitLab

Alien::Build::Plugin::Download::GitLab allows Alien::Build to download from GitLab (in practice, this does not download if the required library is already installed on the system).

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Alien::Build::Plugin::Download::GitLab Dependencies

Required

Alien-Build-2.83 and URI-5.30

Installation of Alien::Build::Plugin::Download::GitLab

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Alien::Libxml2-0.19

Introduction to Alien::Libxml2

Alien::Libxml2 is designed to allow modules to install the C libxml2 library on your system. In BLFS, it uses pkg-config to find how to link to the installed libxml2-2.13.4.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Alien::Libxml2 Dependencies

Required

Alien-Build-Plugin-Download-GitLab-0.01, libxml2-2.13.4, and Path-Tiny-0.146

Recommended (required for the test suite)

Installation of Alien::Libxml2

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

B::COW-0.007

Introduction to B::COW

B::COW provides additional helpers for the B core module to check Copy On Write.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of B::COW

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

B::Hooks::EndOfScope-0.28

Introduction to B::Hooks::EndOfScope

B::Hooks::EndOfScope allows you to execute code when Perl finishes compiling the surrounding scope.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

B::Hooks::EndOfScope Dependencies

Required

Module-Implementation-0.09, Sub-Exporter-Progressive-0.001013 and Variable-Magic-0.64

Recommended (required for the test suite)

Installation of B::Hooks::EndOfScope

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Business::ISBN::Data-20240807.001

Introduction to Business-ISBN-Data

Business-ISBN-Data is a data pack for Business::ISBN.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Business-ISBN-Data

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Capture::Tiny-0.48

Introduction to Capture::Tiny

The Capture::Tiny module captures STDOUT and STDERR from Perl, XS (eXternal Subroutine, i.e. written in C or C++) or external programs.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Capture::Tiny

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Class::Data::Inheritable-0.09

Introduction to Class::Data::Inheritable

Class::Data::Inheritable is for creating accessor/mutators to class data. That is, if you want to store something about your class as a whole (instead of about a single object).

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Class::Data::Inheritable

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Class::Inspector-1.36

Introduction to Class::Inspector

Class::Inspector allows you to get information about a loaded class.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Class::Inspector

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Class::Singleton-1.6

Introduction to Class::Singleton

A Singleton describes an object class that can have only one instance in any system, such as a print spooler. This module implements a Singleton class from which other classes can be derived.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Class::Singleton

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Class:Tiny-1.008

Introduction to Class:Tiny

Class:Tiny offers a minimalist class construction kit.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Class:Tiny

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Clone-0.46

Introduction to Clone

Clone recursively copies perl datatypes.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Clone Dependencies

Recommended (required for the test suite)

Installation of Clone

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Config::AutoConf-0.320

Introduction to Config::AutoConf

The Config::AutoConf module implements some of the AutoConf macros (detecting a command, detecting a library, etc.) in pure perl.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Config::AutoConf Dependencies

Required

Capture-Tiny-0.48 and File-Slurper-0.014

Installation of Config::AutoConf

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

CPAN::Meta::Check-0.018

Introduction to CPAN::Meta::Check

CPAN::Meta::Check verifies if requirements described in a CPAN::Meta object are present.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of CPAN::Meta::Check

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

DateTime-1.65

Introduction to DateTime

DateTime is a date and time object for perl.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

DateTime Dependencies

Required

DateTime-Locale-1.43 and DateTime-TimeZone-2.62

Recommended (required for the test suite)

Installation of DateTime

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

DateTime::Format::Strptime-1.79

Introduction to DateTime::Format::Strptime

DateTime::Format::Strptime implements most of strptime(3), i.e. it takes a string and a pattern and returns a DateTime object.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

DateTime::Format::Strptime Dependencies

Required

DateTime-1.65

Installation of DateTime::Format::Strptime

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

DateTime::Locale-1.43

Introduction to DateTime::Locale

DateTime::Locale provides localization support for DateTime-1.65.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

DateTime::Locale Dependencies

Required

Dist-CheckConflicts-0.11, File-ShareDir-1.118, namespace-autoclean-0.29 and Params-ValidationCompiler-0.31

Recommended (required for the test suite)

Installation of DateTime::Locale

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

DateTime::TimeZone-2.62

Introduction to DateTime::TimeZone

This class is the base class for all time zone objects. A time zone is represented internally as a set of observances, each of which describes the offset from GMT for a given time period.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

DateTime::TimeZone Dependencies

Required

Class-Singleton-1.6, Module-Runtime-0.016, and Params-ValidationCompiler-0.31

Recommended (required for the test suite)

Installation of DateTime::TimeZone

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Devel::StackTrace-2.05

Introduction to Devel::StackTrace

Devel::StackTrace provides an object representing a stack trace.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Devel::StackTrace

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Dist::CheckConflicts-0.11

Introduction to Dist::CheckConflicts

Dist::CheckConflicts declares version conflicts for a distribution, to support post-install updates of dependent distributions.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Dist::CheckConflicts Dependencies

Required

Module-Runtime-0.016

Recommended (required for the test suite)

Installation of Dist::CheckConflicts

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Encode::Locale-1.05

Introduction to Encode::Locale

Encode::Locale determines the locale encoding.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Encode::Locale

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Eval::Closure-0.14

Introduction to Eval::Closure

Eval::Closure safely and cleanly creates closures via string eval.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Eval::Closure Dependencies

Recommended (required for the test suite)

Installation of Eval::Closure

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Exception::Class-1.45

Introduction to Exception::Class

Exception::Class allows you to declare real exception classes in Perl.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Exception::Class Dependencies

Required

Class-Data-Inheritable-0.09 and Devel-StackTrace-2.05

Installation of Exception::Class

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Exporter::Tiny-1.006002

Introduction to Exporter::Tiny

Exporter::Tiny is an exporter with the features of Sub::Exporter but only core dependencies.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Exporter::Tiny

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

ExtUtils::LibBuilder-0.08

Introduction to ExtUtils::LibBuilder

ExtUtils::LibBuilder is a tool to build C libraries.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

ExtUtils::LibBuilder Dependencies

Required

Module-Build-0.4234

Installation of ExtUtils::LibBuilder

This module is built using Build.PL:

perl Build.PL &&
./Build       &&
./Build test

Now, as the root user:

./Build install

FFI::CheckLib-0.31

Introduction to FFI::CheckLib

FFI::CheckLib checks whether a particular dynamic library is available for FFI (Foreign Function Interface) to use.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

FFI::CheckLib Dependencies

Recommended (required for the test suite)

Installation of FFI::CheckLib

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

File::chdir-0.1011

Introduction to File::chdir

File::chdir provides a more sensible way to change directories.

Perl's chdir() has the unfortunate problem of being very, very, very global. If any part of your program calls chdir() or if any library you use calls chdir(), it changes the current working directory for the *whole* program. File::chdir gives you an alternative, $CWD and @CWD.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of File::chdir

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

File::Copy::Recursive-0.45

Introduction to File::Copy::Recursive

This module copies and moves directories recursively (or single files), to an optional depth and attempts to preserve each file or directory's mode.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

File::Copy::Recursive Dependencies

Recommended (required for the test suite)

Installation of File::Copy::Recursive

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

File::Find::Rule-0.34

Introduction to File::Find::Rule

File::Find::Rule is a friendlier interface to File::Find. It allows you to build rules which specify the desired files and directories.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

File::Find::Rule Dependencies

Required

Number-Compare-0.03 and Text-Glob-0.11

Installation of File::Find::Rule

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Contents

Installed Programs: findrule

Short Descriptions

findrule

is a command line wrapper to File::Find::Rule

File::Listing-6.16

Introduction to File::Listing

File::Listing parses a directory listing.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

File::Listing Dependencies

Required

HTTP-Date-6.06

Installation of File::Listing

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

File::ShareDir-1.118

Introduction to File::ShareDir

File::ShareDir allows you to access data files which have been installed by File::ShareDir::Install.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

File::ShareDir Dependencies

Required

Class-Inspector-1.36 and File-ShareDir-Install-0.14

Installation of File::ShareDir

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

File::ShareDir::Install-0.14

Introduction to File::ShareDir::Install

File::ShareDir::Install allows you to install read-only data files from a distribution.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of File::ShareDir::Install

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

HTML::Tagset-3.24

Introduction to HTML::Tagset

HTML::Tagset provides several data tables useful in parsing HTML.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of HTML::Tagset

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

HTTP::CookieJar-0.014

Introduction to HTTP::CookieJar

HTTP::CookieJar provides a minimalist HTTP user agent cookie jar.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

HTTP::CookieJar Dependencies

Required

HTTP-Date-6.06

Recommended (required for the test suite)

Installation of HTTP::CookieJar

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

HTTP::Cookies-6.11

Introduction to HTTP::Cookies

HTTP::Cookies provides a class for objects that represent a "cookie jar" -- that is, a database of all the HTTP cookies that a given LWP::UserAgent (from libwww-perl-6.77) object knows about.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

HTTP::Cookies Dependencies

Required

HTTP-Message-6.46

Installation of HTTP::Cookies

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

HTTP::Date-6.06

Introduction to HTTP::Date

HTTP::Date provides functions to deal with the date formats used by the HTTP protocol and also with some other date formats.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

HTTP::Date Dependencies

Recommended

Installation of HTTP::Date

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

HTTP::Message-6.46

Introduction to HTTP::Message

HTTP::Message provides a base class for HTTP style message objects.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

HTTP::Message Dependencies

Required

Clone-0.46, Encode-Locale-1.05, HTTP-Date-6.06, IO-HTML-1.004, LWP-MediaTypes-6.04, and URI-5.30

Recommended (required for the test suite)

Installation of HTTP::Message

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

HTTP::Negotiate-6.01

Introduction to HTTP::Negotiate

HTTP::Negotiate provides a complete implementation of the HTTP content negotiation algorithm.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

HTTP::Negotiate Dependencies

Recommended (required for the test suite)

Installation of HTTP::Negotiate

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

IO::HTML-1.004

Introduction to IO::HTML

IO::HTML opens an HTML file with automatic character set detection.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of IO::HTML

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

IPC::System::Simple-1.30

Introduction to IPC::System::Simple

IPC::System::Simple takes the hard work out of calling external commands and producing detailed diagnostics.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of IPC::System::Simple

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

List::MoreUtils::XS-0.430

Introduction to List::MoreUtils::XS

List::MoreUtils::XS is a compiled backend for List::MoreUtils

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of List::MoreUtils::XS

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

List::SomeUtils-0.59

Introduction to List::SomeUtils

List::SomeUtils provides the stuff missing in List::Util.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

List::SomeUtils Dependencies

Required

Module-Implementation-0.09 and List-SomeUtils-XS-0.58

Installation of List::SomeUtils

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

List::SomeUtils::XS-0.58

Introduction to List::SomeUtils::XS

List::SomeUtils::XS is a (faster) XS (eXternal Subroutine) implementation for List::SomeUtils.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

List::SomeUtils::XS Dependencies

Recommended (required for the test suite)

Installation of List::SomeUtils::XS

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

List::UtilsBy-0.12

Introduction to List::UtilsBy

List::UtilsBy provides a number of higher-order list utility functions.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of List::UtilsBy

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

LWP::MediaTypes-6.04

Introduction to LWP::MediaTypes

LWP::MediaTypes guesses the media type (i.e. the MIME Type) for a file or URL.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

LWP::MediaTypes Dependencies

Recommended (required for the test suite)

Installation of LWP::MediaTypes

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

MIME::Charset-1.013.1

Introduction to MIME::Charset

MIME::Charset provides information about character sets used for MIME messages on the internet, such as their encodings.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

MIME::Charset Dependencies

Recommended

Installation of MIME::Charset

This module uses a variant of the standard build and installation instructions:

yes '' | perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Command Explanations

yes |: Perl will ask if you wish to install a further module for handling legacy Japanese encodings, and another which it would use for translating documentation to Japanese. The default option is 'n', using 'yes' allows you to script the build.

Module::Implementation-0.09

Introduction to Module::Implementation

Module::Implementation loads one of several alternate underlying implementations of a module (e.g. eXternal Subroutine or pure Perl, or an implementation for a given OS).

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Module::Implementation Dependencies

Required

Module-Runtime-0.016 and Try-Tiny-0.31

Recommended (required for the test suite)

Installation of Module::Implementation

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Module::Runtime-0.016

Introduction to Module::Runtime

Module::Runtime provides functions to deal with runtime handling of Perl modules.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Module::Runtime

Although Module::Build is still listed as a prerequisite, it is no-longer necessary on systems with a working make.

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

MRO::Compat-0.15

Introduction to MRO::Compat

The "mro" namespace provides several utilities for dealing with method resolution order and method caching in general in Perl 5.9.5 and higher. This module provides those interfaces for earlier versions of Perl.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of MRO::Compat

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

namespace::autoclean-0.29

Introduction to namespace::autoclean

This module is very similar to namespace::clean, except it will clean all imported functions, no matter if you imported them before or after you used the pragma. It will also not touch anything that looks like a method.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

namespace::autoclean Dependencies

Required

namespace-clean-0.27 and Sub-Identify-0.14

Recommended (required for the test suite)

Installation of namespace::autoclean

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

namespace::clean-0.27

Introduction to namespace::clean

This package allows you to keep imports and functions out of your namespace.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

namespace::clean Dependencies

Required

B-Hooks-EndOfScope-0.28 and Package-Stash-0.40

Installation of namespace::clean

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Net::HTTP-6.23

Introduction to Net::HTTP

The Net::HTTP class is a low level HTTP client. An instance of the class represents a connection to an HTTP server.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Net::HTTP Dependencies

Required

URI-5.30

Installation of Net::HTTP

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Net::SSLeay-1.94

Introduction to Net::SSLeay

Net::SSLeay is a Perl extension for using OpenSSL.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Net::SSLeay

[Note]

Note

If enabling the external tests, one test in t/external/15_altnames.t may fail.

This module uses a variant of the standard build and installation instructions:

yes '' | perl Makefile.PL &&
make                      &&
make test

Now, as the root user:

make install

Command Explanations

yes '': Perl will ask if you wish to run external tests, which will fail if you do not have network connectivity. The default is 'n', specifying this allows you to script the build.

Number::Compare-0.03

Introduction to Number::Compare

Number::Compare compiles a simple comparison to an anonymous subroutine, which you can call with a value to be tested against. It understands IEC standard magnitudes (k, ki, m, mi, g, gi).

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Number::Compare

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Package::Stash-0.40

Introduction to Package::Stash

Manipulating stashes (Perl's symbol tables) is occasionally necessary, but incredibly messy, and easy to get wrong. This module hides all of that behind a simple API.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Package::Stash Dependencies

Required

Dist-CheckConflicts-0.11 and Module-Implementation-0.09

Recommended (required for the test suite)

Installation of Package::Stash

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Params::Validate-1.31

Introduction to Params::Validate

Params::Validate allows you to validate method or function call parameters to an arbitrary level of specificity.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Params::Validate Dependencies

Required

Module-Build-0.4234 and Module-Implementation-0.09

Recommended (required for the test suite)

Installation of Params::Validate

This module is built using Build.PL:

perl Build.PL &&
./Build       &&
./Build test

Now, as the root user:

./Build install

Params::ValidationCompiler-0.31

Introduction to Params::ValidationCompiler

Params::ValidationCompiler builds an optimized subroutine parameter validator.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Params::ValidationCompiler Dependencies

Required

Exception-Class-1.45 and Specio-0.48

Recommended (required for the test suite)

Installation of Params::ValidationCompiler

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Path::Tiny-0.146

Introduction to Path::Tiny

Path::Tiny provides a small fast utility for working with file paths.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Path::Tiny

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Role::Tiny-2.002004

Introduction to Role::Tiny

Role::Tiny is a minimalist role composition tool.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Role::Tiny

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Scope::Guard-0.21

Introduction to Scope::Guard

Scope::Guard provides a convenient way to perform cleanup or other forms of resource management at the end of a scope.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Scope::Guard

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Specio-0.48

Introduction to Specio

Specio provides classes for representing type constraints and coercion, along with syntax sugar for declaring them.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Specio Dependencies

Required

Devel-StackTrace-2.05, Eval-Closure-0.14, Module-Runtime-0.016, Role-Tiny-2.002004, Sub-Quote-2.006008, and Try-Tiny-0.31

Recommended (required for the test suite)
Optional

namespace-autoclean-0.29 (for the test suite)

Installation of Specio

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Sub::Exporter::Progressive-0.001013

Introduction to Sub::Exporter::Progressive

Sub::Exporter::Progressive is a wrapper for Sub::Exporter.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Sub::Exporter::Progressive

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Sub::Identify-0.14

Introduction to Sub::Identify

Sub::Identify allows you to retrieve the real name of code references. It is encouraged to migrate to Sub::Util (a core module) when possible.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Sub::Identify

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Sub::Quote-2.006008

Introduction to Sub::Quote

Sub::Quote provides ways to generate subroutines from strings.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Sub::Quote

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Sub::Uplevel-0.2800

Introduction to Sub::Uplevel

Sub::Uplevel allows you to fool a caller that it is running in a higher stack frame.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Sub::Uplevel

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Term::Table-0.022

Introduction to Term::Table

Term::Table formats a header and rows into a table. This is used by some failing tests to provide diagnostics about what has gone wrong.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Term::Table

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Test::Deep-1.204

Introduction to Test::Deep

Test::Deep gives you very flexible ways to check that the result you got is the result you were expecting.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Test::Deep

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Test::Exception-0.43

Introduction to Test::Exception

Test::Exception provides convenience methods for testing exception based code.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Test::Exception Dependencies

Required

Sub-Uplevel-0.2800

Installation of Test::Exception

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Test::Fatal-0.017

Introduction to Test::Fatal

The Test::Fatal module provides simple helpers for testing code which throws exceptions.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Test::Fatal Dependencies

Required

Try-Tiny-0.31

Installation of Test::Fatal

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Test::File-1.993

Introduction to Test::File

Test::File provides a collection of test utilities for file attributes.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Test::File Dependencies

Recommended (required for the test suite)

Installation of Test::File

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Test::File::ShareDir-1.001002

Introduction to Test::File::ShareDir

Test::File::ShareDir is some low level plumbing to enable a distribution to perform tests while consuming its own share directories in a manner similar to how they will be once installed. This allows File-ShareDir-1.118 to see the latest version of content instead of whatever is installed on the target system where you are testing.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Test::File::ShareDir Dependencies

Required

Class-Tiny-1.008, File-Copy-Recursive-0.45, File-ShareDir-1.118, Path-Tiny-0.146, and Scope-Guard-0.21

Recommended (required for the test suite)

Installation of Test::File::ShareDir

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Test::LeakTrace-0.17

Introduction to Test::LeakTrace

Test::LeakTrace traces memory leaks.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Test::LeakTrace

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Test::Needs-0.002010

Introduction to Test::Needs

Test::Needs skips tests if a requested module is not present.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Test::Needs

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Test::Requires-0.11

Introduction to Test::Requires

The Test::Requires module checks if another (optional) module can be loaded, and if not it skips all the current tests.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Test::Requires

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Test::RequiresInternet-0.05

Introduction to Test::RequiresInternet

Test::RequiresInternet is intended to easily test network connectivity before functional tests begin to connect to non-local Internet resources.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Test::RequiresInternet

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Test::Simple-1.302200

Introduction to Test::Simple

Test::Simple contains basic utilities for writing tests.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Test::Simple Dependencies

Required

Term-Table-0.022

Installation of Test::Simple

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Test::utf8-1.02

Introduction to Test::utf8

Test::utf8 is a collection of tests useful for dealing with utf8 strings in Perl.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Test::utf8

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Test::Warnings-0.033

Introduction to Test::Warnings

Test::Warnings tests for warnings and the lack of them.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Test::Warnings

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Test::Without::Module-0.23

Introduction to Test::Without::Module

This module allows you to deliberately hide modules from a program even though they are installed. This is mostly useful for testing modules that have a fallback when a certain dependency module is not installed.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Test::Without::Module

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Test2::Plugin::NoWarnings-0.10

Introduction to Test2::Plugin::NoWarnings

Test2::Plugin::NoWarnings causes tests to fail if there are any warnings while they run.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Test2::Plugin::NoWarnings Dependencies

Required

Test-Simple-1.302200

Recommended (required for the test suite)

Installation of Test2::Plugin::NoWarnings

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Text::CSV_XS-1.56

Introduction to Text::CSV_XS

Text::CSV_XS provides facilities for the composition and decomposition of comma-separated values.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Text::CSV_XS

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Text::Diff-1.45

Introduction to Text::Diff

Text::Diff performs diffs on files and record sets.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Text::Diff Dependencies

Required

Algorithm-Diff-1.201

Installation of Text::Diff

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Text::Glob-0.11

Introduction to Text::Glob

Text::Glob implements glob(3) style matching that can be used to match against text, rather than fetching names from a filesystem.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Text::Glob

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Tie::Cycle-1.228

Introduction to Tie::Cycle

You use Tie::Cycle to go through a list over and over again. Once you get to the end of the list, you go back to the beginning. You don't have to worry about any of this since the magic of tie does that for you.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Tie::Cycle

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

TimeDate-2.33

Introduction to TimeDate

TimeDate provides miscellaneous timezone manipulation routines.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of TimeDate

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Try::Tiny-0.31

Introduction to Try::Tiny

Try::Tiny provides try and catch to expect and handle exceptional conditions, avoiding quirks in Perl and common mistakes.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Try::Tiny Dependencies

Optional (can be used by the test suite)

Capture-Tiny-0.48

Installation of Try::Tiny

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Variable::Magic-0.64

Introduction to Variable::Magic

Magic is Perl's way of enhancing variables. With this module, you can add your own magic to any variable.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of Variable::Magic

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

WWW::RobotRules-6.02

Introduction to WWW::RobotRules

WWW::RobotRules parses robots.txt files, creating a WWW::RobotRules object with methods to check if access to a given URL is prohibited.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

WWW::RobotRules Dependencies

Required (runtime)

libwww-perl-6.77 (install this module first and install that later)

Installation of WWW::RobotRules

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

XML::LibXML-2.0210

Introduction to XML::LibXML

XML::LibXML is a perl binding for libxml2-2.13.4.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Additional Download

XML::LibXML Dependencies

Required

Alien-Libxml2-0.19 and XML-SAX-1.02

Installation of XML::LibXML

First, apply a patch to fix issues with the testsuite when compiled against libxml2-2.13:

patch -Np1 -i ../XML-LibXML-2.0210-testsuite_fixes-1.patch

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

XML::NamespaceSupport-1.12

Introduction to XML::NamespaceSupport

XML::NamespaceSupport offers a simple way to process namespaced XML names from within any application that may need them.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of XML::NamespaceSupport

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

XML::SAX-1.02

Introduction to XML::SAX

XML::SAX is a SAX parser access API for Perl. It includes classes and APIs required for implementing SAX drivers, along with a factory class for returning any SAX parser installed on the user's system.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

XML::SAX Dependencies

Required

libxml2-2.13.4, XML-NamespaceSupport-1.12, and XML-SAX-Base-1.09

Installation of XML::SAX

This module uses a variant of the standard build and installation instructions:

yes | perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install

Command Explanations

yes: Perl will ask if you want it to alter ParserDetails.ini and then wait for a response. The default is 'y'. Using 'yes' allows you to script this.

XML::SAX::Base-1.09

Introduction to XML::SAX::Base

This module has a very simple task - to be a base class for PerlSAX drivers and filters.

[Note]

Note

Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.

Package Information

Installation of XML::SAX-Base

This module uses the standard build and installation instructions:

perl Makefile.PL &&
make             &&
make test

Now, as the root user:

make install