The installation of all the software is pretty straightforward and you'll think it's so much easier and shorter to give the generic installation instructions for each package and only explain how to install something if a certain package requires an alternate installation method. Although I agree with you on that, I, however, choose to give the full instructions for each and every package. This is simply to avoid any possible confusion and errors.
It's time to enter our chroot'ed environment now in order to install the rest of the software we need.
Enter the following commands to setup the chroot'ed environment. From this point on there's no need to use the $LFS variable anymore, because everything you do will be restricted to the LFS partition (since / is actually /mnt/xxx but the shell doesn't know that).
root:~# cd $LFS
root:/mnt/sda5# chroot $LFS bash
We won't be compiling a new kernel image yet. We'll do that after we have finished the installation of the basic system software in this chapter. But because certain software need the kernel header files, we're going to unpack the kernel archive now and setup the proper symlinks in /usr/include. Create the /usr/include/linux and /usr/include/asm symlinks by running the following commands:
root:~# cd /usr/include
root:/usr/include# ln -s ../src/linux/include/linux linux
root:/usr/include# ln -s ../src/linux/include/asm-ppc asm
Install Ed by running the following commands:
root:/usr/src/ed-0.2# ./configure --prefix=/usr
root:/usr/src/ed-0.2# make
root:/usr/src/ed-0.2# make install
Install Patch by running the following commands:
root:/usr/src/patch-2.5.4# ./configure --prefix=/usr
root:/usr/src/patch-2.5.4# make
root:/usr/src/patch-2.5.4# make install
Install GCC by running the following commands:
root:/usr/src# mkdir /usr/src/gcc-build
root:/usr/src# cd /usr/src/gcc-build
root:/usr/src/gcc-build# ../gcc-2.95.2/configure \
> --prefix=/usr --with-local-prefix=/usr \
> --with-gxx-include-dir=/usr/include/g++ \
> --enable-shared --enable-languages=c,c++
root:/usr/src/gcc-build# make bootstrap
root:/usr/src/gcc-build# make install
Install Bison by running the following commands:
root:/usr/src/bison-1.28# ./configure --prefix=/usr \
> --datadir=/usr/share/bison
root:/usr/src/bison-1.28# make
root:/usr/src/bison-1.28# make install
Install Mawk by running the following commands:
root:/usr/src/mawk-1.3.3# ./configure
root:/usr/src/mawk-1.3.3# make
root:/usr/src/mawk-1.3.3# make -e BINDIR=/usr/bin \
> MANDIR=/usr/share/man/man1 install
root:/usr/src/mawk-1.3.3# cd /usr/bin
root:/usr/bin# ln -s mawk awk
Install Findutils by running the following commands:
root:/usr/src/findutils-4.1# ./configure --prefix=/usr
root:/usr/src/findutils-4.1# make
root:/usr/src/findutils-4.1# make install
This package is known to cause compilation problem. If you're having trouble compiling this package as well, you can download a patch from http://www.linuxfromscratch.org/download/findutils-4.1.patch.gz
Install this patch by running the following command:
root:/usr/src/# patch -Np1 \
> -i ../findutils-4.1.patch.gz
Now recompile the package using the same commands as above.
Install Termcap by running the following commands:
root:/usr/src/termcap-1.3# ./configure --prefix=/usr
root:/usr/src/termcap-1.3# make
root:/usr/src/termcap-1.3# make install
Install Ncurses by running the following commands:
root:/usr/src/ncurses-4.2# ./configure --prefix=/usr --with-shared
root:/usr/src/ncurses-4.2# make
root:/usr/src/ncurses-4.2# make install
Install Less by running the following commands:
root:/usr/src/less-340# ./configure --prefix=/usr
root:/usr/src/less-340# make
root:/usr/src/less-340# make install
root:/usr/src/less-340# mv /usr/bin/less /bin
Install Perl by running the following commands:
root:/usr/src/perl-5.6.0# ./Configure
root:/usr/src/perl-5.6.0# make
root:/usr/src/perl-5.6.0# make test
root:/usr/src/perl-5.6.0# make install
Note that you have to change the installation path to /usr yourself. The Perl installation defaults to the /usr/local/subdir
Also note that a few tests during the make test phase will fail because we don't have network support installed yet.
Install M4 by running the following commands:
root:/usr/src/m4-1.4# ./configure --prefix=/usr
root:/usr/src/m4-1.4# make
root:/usr/src/m4-1.4# make install
Install Texinfo by running the following commands:
root:/usr/src/texinfo-4.0# ./configure --prefix=/usr
root:/usr/src/texinfo-4.0# make
root:/usr/src/texinfo-4.0# make install
Install Autoconf by running the following commands:
root:/usr/src/autoconf-2.13# ./configure --prefix=/usr
root:/usr/src/autoconf-2.13# make
root:/usr/src/autoconf-2.13# make install
Install Automake by running the following commands:
root:/usr/src/automake-1.4# ./configure --prefix=/usr
root:/usr/src/automake-1.4# make install
Install Bash by running the following commands:
root:/usr/src/bash-2.04# ./configure --prefix=/usr
root:/usr/src/bash-2.04# make
root:/usr/src/bash-2.04# make install
root:/usr/src/bash-2.04# mv /usr/bin/bash /bin
Install Flex by running the following commands:
root:/usr/src/flex-2.5.4a# ./configure --prefix=/usr
root:/usr/src/flex-2.5.4a# make
root:/usr/src/flex-2.5.4a# make install
Install Binutils by running the following commands:
root:/usr/src/binutils-2.9.5.0.37# ./configure --prefix=/usr
root:/usr/src/binutils-2.9.5.0.37# make
root:/usr/src/binutils-2.9.5.0.37# make install
Install Bzip2 by running the following commands:
root:/usr/src/bzip2-0.9.5d# make
root:/usr/src/bzip2-0.9.5d# make PREFIX=/usr install
root:/usr/src/bzip2-0.9.5d# cd /usr/bin
root:/usr/bin# mv bunzip2 bzip2 /bin
Install Diffutils by running the following commands:
root:/usr/src/diffutils-2.7# ./configure --prefix=/usr
root:/usr/src/diffutils-2.7# make
root:/usr/src/diffutils-2.7# make install
Install E2fsprogs by running the following commands:
root:/usr/src/e2fsprogs-1.18# ./configure --prefix=/usr
root:/usr/src/e2fsprogs-1.18# make
root:/usr/src/e2fsprogs-1.18# make install
root:/usr/src/e2fsprogs-1.18# cd /usr/sbin
root:/usr/sbin# mv *e2* *fs* mklost+found /sbin
Install File by running the following commands:
root:/usr/src/file-3.26# ./configure --prefix=/usr
root:/usr/src/file-3.26# make
root:/usr/src/file-3.26# make install
Install Fileutils by running the following commands:
root:/usr/src/fileutils-4.0# ./configure --prefix=/usr
root:/usr/src/fileutils-4.0# make
root:/usr/src/fileutils-4.0# make install
root:/usr/src/fileutils-4.0# cd /usr/bin
root:/usr/bin# mv chgrp chmod chown cp dd df ln /bin
root:/usr/bin# mv ls mkdir mknod mv rm rmdir sync /bin
Install Grep by running the following commands:
root:/usr/src/grep-2.4.2# ./configure --prefix=/usr
root:/usr/src/grep-2.4.2# make
root:/usr/src/grep-2.4.2# make install
Install Groff by running the following commands:
root:/usr/src/groff-1.15# ./configure --prefix=/usr
root:/usr/src/groff-1.15# make
root:/usr/src/groff-1.15# make install
Install Gzip by running the following commands:
root:/usr/src/gzip-1.2.4a# ./configure --prefix=/usr
root:/usr/src/gzip-1.2.4a# make
root:/usr/src/gzip-1.2.4a# make install
root:/usr/src/gzip-1.2.4a# cd /usr/bin
root:/usr/bin# mv gunzip gzip /bin
Install Ld.so by running the following commands:
root:/usr/src/ld.so-1.9.10# cd util
root:/usr/src/ld.so-1.9.10/util# make ldd ldconfig
root:/usr/src/ld.so-1.9.10/util# cp ldd /bin
root:/usr/src/ld.so-1.9.10/util# cp ldconfig /sbin
root:/usr/src/ld.so-1.9.10/util# rm /usr/bin/ldd
Install Libtool by running the following commands:
root:/usr/src/libtool-1.3.4# ./configure --prefix=/usr
root:/usr/src/libtool-1.3.4# make
root:/usr/src/libtool-1.3.4# make install
Install Linux86 by running the following commands:
root:/usr/src/linux-86# cd as
root:/usr/src/linux-86/as# make
root:/usr/src/linux-86# make install
root:/usr/src/linux-86# cd ../ld
root:/usr/src/linux-86# make ld86
root:/usr/src/linux-86# make install
Install Make by running the following commands:
root:/usr/src/make-3.78.1# ./configure --prefix=/usr
root:/usr/src/make-3.78.1# make
root:/usr/src/make-3.78.1# make install
Install Shellutils by running the following commands:
root:/usr/src/sh-utils-2.0# ./configure --prefix=/usr
root:/usr/src/sh-utils-2.0# make
root:/usr/src/sh-utils-2.0# make install
root:/usr/src/sh-utils-2.0# cd /usr/bin
root:/usr/bin# mv date echo false pwd stty /bin
root:/usr/bin# mv su true uname hostname /bin
Install the Shadow Password Suite by running the following commands:
root:/usr/src/shadow-19990827# ./configure --prefix=/usr
root:/usr/src/shadow-19990827# make
root:/usr/src/shadow-19990827# make install
root:/usr/src/shadow-19990827# cd etc
root:/usr/src/shadow-19990827/etc# cp limits login.access \
> login.defs.linux shells suauth /etc
root:/usr/src/shadow-19990827# mv /etc/login.defs.linux \
> /etc/login.defs
Install Man by running the following commands:
root:/usr/src/man1.5h1# ./configure -default
root:/usr/src/man1.5h1# make
root:/usr/src/man1.5h1# make install
Install Modutils by running the following commands:
root:/usr/src/modutils-2.3.9# ./configure
root:/usr/src/modutils-2.3.9# make
root:/usr/src/modutils-2.3.9# make install
Install Procinfo by running the following commands:
root:/usr/src/procinfo-17# make
root:/usr/src/procinfo-17# make install
Install Procps by running the following commands:
root:/usr/src/procps-2.0.6# gcc -O3 -Wall -Wno-unused -c watch.c
root:/usr/src/procps-2.0.6# make
root:/usr/src/procps-2.0.6# make -e XSCPT="" install
root:/usr/src/procinfo-17# mv /usr/bin/kill /bin
Install Psmisc by running the following commands:
root:/usr/src/psmisc-19# make
root:/usr/src/psmisc-19# make install
Install Sed by running the following commands:
root:/usr/src/sec-3.02# ./configure --prefix=/usr
root:/usr/src/sec-3.02# make
root:/usr/src/sec-3.02# make install
root:/usr/src/sec-3.02# mv /usr/bin/sed /bin
Install Start-stop-daemon by running the following commands:
root:/usr/src/ssd-0.4.1# make
root:/usr/src/ssd-0.4.1# make install
Install Sysklogd by running the following commands:
root:/usr/src/sysklogd-1.3-31# make
root:/usr/src/sysklogd-1.3-31# make install
Install Sysvinit by running the following commands:
root:/usr/src/sysvinit-2.78# cd src
root:/usr/src/sysvinit-2.78# make
root:/usr/src/sysvinit-2.78# make install
Install Tar by running the following commands:
root:/usr/src/tar-1.13# ./configure --prefix=/usr
root:/usr/src/tar-1.13# make
root:/usr/src/tar-1.13# make install
root:/usr/src/tar-1.13# mv /usr/bin/tar /bin
Install Textutuils by running the following commands:
root:/usr/src/textutils-2.0# ./configure --prefix=/usr
root:/usr/src/textutils-2.0# make
root:/usr/src/textutils-2.0# make install
root:/usr/src/textutils-2.0# mv /usr/bin/cat /bin
You need to unpack both the vim-rt and vim-src packages to install Vim. Install Vim by running the following commands:
root:/usr/src/vim-5.6# ./configure --prefix=/usr
root:/usr/src/vim-5.6# make
root:/usr/src/vim-5.6# make install
root:/usr/src/vim-5.6# cd /usr/bin
root:/usr/bin# ln -s vim vi
Before we can install the package we have to edit the MCONFIG file, find and modify the following variables as follows:
HAVE_PASSWD=yes
HAVE_SLN=yes
HAVE_TSORT=yes
Install Util-Linux by running the following commands:
root:/usr/src/util-linux-2.10h# groupadd -g 5 tty
root:/usr/src/util-linux-2.10h# ./configure
root:/usr/src/util-linux-2.10h# make
root:/usr/src/util-linux-2.10h# make install
Install Pmac-utils by running the following commands:
root:/usr/src/pmac-utils-1.1.1# make clock
root:/usr/src/pmac-utils-1.1.1# cp clock /sbin
root:/usr/src/pmac-utils-1.1.1# rm /sbin/hwclock
Create a new file /sbin/hwclock containing the following:
#!/bin/sh
# Begin /sbin/hwclock
/sbin/clock -s
# End /sbin/hwclock
Set the right permissions by running the following command:
chmod 755 /sbin/hwclock