The DHCP package comes with both a client (called dhclient) and a server program for using DHCP. If you want to install this package, the instructions can be found at DHCP-3.0pl2. Note that if you only want to use the client, you do not need to run the server and so do not need the startup script and links provided for the server daemon. You only need to run the DHCP server if you're providing this service to a network, and it's likely that you'll know if that's the case; if it isn't, don't run the server! Once you have installed the package, return here for information on how to configure the client (dhclient).
To configure dhclient, you need to create two files, /etc/sysconfig/network-devices/ifconfig.eth0 and /etc/dhclient.conf.
First, create the ifconfig.eth0 file with the following commands (note that this will overwrite any existing file):
cd /etc/sysconfig/network-devices && cat > /etc/sysconfig/network-devices/ifconfig.eth0 << "EOF" ONBOOT=yes DHCP_PROG=/sbin/dhclient DHCP_START=<appropriate start parameters> DHCP_STOP=-r EOF |
For more information on the appropriate DHCP_START and DHCP_STOP values, examine the man page for dhclient.
Next, you should then create the /etc/dhclient.conf using the following command:
cat > /etc/dhclient.conf << "EOF"
# dhclient.conf
interface "eth0"{
prepend domain-name-servers 127.0.0.1;
request subnet-mask, broadcast-address, time-offset, routers,
domain-name, domain-name-servers, host-name;
require subnet-mask, domain-name-servers;
}
# end dhclient.conf
EOF |