alsa-lib-1.2.12

Introduction to ALSA Library

The ALSA Library package contains the ALSA library used by programs (including ALSA Utilities) requiring access to the ALSA sound interface.

This package is known to build and work properly using an LFS 12.2 platform.

Package Information

Additional Downloads

ALSA Library Dependencies

Recommended (Runtime)

Systemd-256.4

[Note]

Note

If the recommended runtime dependency is not installed, you may need to run any application requiring ALSA library as the root user or a user in the audio group.

Optional

Doxygen-1.12.0 and Python2

Kernel Configuration

If needed, enable the following options in the kernel configuration and recompile the kernel:

Device Drivers --->
  <*/M> Sound card support --->                                          [SOUND]
    # Select settings and drivers appropriate for your hardware
    # in the submenu:
    <*/M> Advanced Linux Sound Architecture --->                           [SND]

In the Device Drivers ⇒ Sound card support ⇒ Advanced Linux Sound Architecture section of the kernel configuration, select the settings and drivers appropriate for your hardware. If necessary, recompile and install your new kernel.

Installation of ALSA Library

Install ALSA Library by running the following commands:

./configure &&
make

If you have Doxygen installed and you wish to build the library API documentation, run the following commands from the top-level directory of the source tree:

make doc

To test the results, issue: make check.

Now, as the root user, install the package and recommended configuration files:

make install &&
tar -C /usr/share/alsa --strip-components=1 -xf ../alsa-ucm-conf-1.2.12.tar.bz2

To install the API documentation, run the following command as the root user:

install -v -d -m755 /usr/share/doc/alsa-lib-1.2.12/html/search &&
install -v -m644 doc/doxygen/html/*.* \
                /usr/share/doc/alsa-lib-1.2.12/html &&
install -v -m644 doc/doxygen/html/search/* \
                /usr/share/doc/alsa-lib-1.2.12/html/search

Configuring ALSA Library

Config Files

~/.asoundrc and /etc/asound.conf

Configuration Information

The default alsa.conf is adequate for most installations. For extra functionality and/or advanced control of your sound device, you may need to create additional configuration files. For information on the available configuration parameters, visit https://www.alsa-project.org/main/index.php/Asoundrc.

Contents

Installed Program: aserver
Installed Library: libasound.so and libatopology.so
Installed Directories: /usr/include/alsa, /usr/share/alsa and /usr/share/doc/alsa-lib-1.2.12

Short Descriptions

aserver

is the ALSA server

libasound.so

contains the ALSA API functions

libatopology.so

contains API functions for the ALSA topologies